Professional PVC Panel Manufacturers Share The Plate Replacement Steps

Professional PVC panel manufacturers share the plate replacement steps

PVC panels are not only good in use, but also at a special price and simple equipment. Therefore, many people will first consider applying it when opening a store or decorating and designing. Then, when decorating and designing again, the original PVC panel is also required to be revoked. . And this kind of technical expertise can be very good practical operation, the following PVC gusset manufacturers will find technical professional staff of the technical professional PVC panel manufacturer for consultation.

When the equipment is decorating the ceiling, we require that the house be cleaned up, and then a new decoration ceiling will be installed in the future. In addition, pay attention to the height-to-width ratio of the suspended ceiling when decorating the ceiling of the equipment. According to our habit, we should clarify the height-to-width ratio of the suspended ceiling. Find a suitable direction and then carry out the next step of equipment. In addition, it is also required to determine the direction of the main keel line, first install the ceiling keel to ensure the leveling and balance of the ceiling keel, and then install the screw rod and the side main keel to ensure firmness and flatness. The equipment is spliced, and the equipment process and the whole process are very complicated, which requires us to keep improving and quality.

When applying the PVC panel, we need to revoke it first, and when revoking, we need to consider whether we need to reapply the original main keel. If we don’t apply it, we can revoke it with peace of mind. The method is also very simple. When revoking, we must first find objects to cover the items in the store, so as to avoid the dust from destroying and kneading the objects. If it is found that the power circuit is fragile when canceling, then we can also take this opportunity to carry out re-equipment to ensure the safety of the route and the service life of the application. In addition, pay attention to cancel the connection point board first when canceling, because this kind of local decoration ceiling has a longer time for equipment, and then the carrying capacity is relatively weak. Therefore, it is also required to cancel this type of local first at such times to avoid Show a lot of problems. If it is to preserve the original main keel, you need to be careful not to put a lot of work pressure on the main keel, and the scope of efficacy should be small to ensure the safety of removing the decoration ceiling.