Interior PVC Folding Door
PVC folding door has a wide range of styles, which can be selected according to the decoration style of the home, which can greatly enhance the decoration style of the home.
Product Introduction
Introduction
PVC folding door has a wide range of styles, which can be selected according to the decoration style of the home, which can greatly enhance the decoration style of the home.
After it is opened, it can be pushed to the end, occupying only a little side space, and the light will not be blocked, which can make the house more open.
Its incubator and sealing are not bad, can insulate cold and heat, isolate oil fumes, moisture and fire, reduce noise.
PVC folding doors are made of high-quality plastic and are lightweight, so it is easy to open and close.
Specifications
Product Name | Plastic PVC Folding Doors |
Finishe Type | Finished |
Material | PVC, Calcium Carbonate And Other Additives |
PVC Content | 50%-80% |
Door Type | Accordion with glass and without glass |
Included | Hardware |
Features | Trimmable |
Width | 71, 81, 86, 91, 101, 116mm and custom size |
Thickness | 6, 10, 12mm |
Design | More than 1000 patterns, OEM is acceptable |
Product Detail
Frosted glass PVC folding door for bathroom
PVC sliding door with glass
PVC accordion door room divider
White color PVC folding door
PVC accordion door
Our Certificate
Installation
A. Find a suitable position, place the track according to the position where you want to install the folding door, mark the door frame, measure whether the track length is suitable, and saw off the excess with a saw. Slip the bundled folding door into the track, as close as possible to the middle to prevent slipping during installation. After determining the opening direction of the folding door, the track is fixed to the wall or door frame with screws, in the order of first middle and then two sides. If it is into the cement wall, the screw hole should be laid in advance. Once the track is installed, the folding door can be unlocked.
B. Install the fixed card slot and mark the fixed card slot on the door frame in the direction where the folding door is retracted, and the straight line where the fixed card slot is located is 90 degrees to the above track. Put the folding door away and carefully snap the rear bezel of the folding door into the fixed card slot from top to bottom to complete the installation.
C. Install the suction plate to pull the folding door open, and determine the position of the suction plate on the wall or door frame according to the position of the suction stone on the door. After determining the position of the suction plate, use an impact drill to punch the hole, about four centimeters deep, and then punch into the rubber sleeve. Hold the blister plate, align the hole on it with the center of the rubber sleeve hole, use a screwdriver to screw the screw into the rubber sleeve, fix the iron blister plate, and install the remaining iron suction plate in the same way.
D. Install the door handle to pull up the lid of the handle, fix the two sides of the handle with screws, close the handle cover, and install it.
Packaging & Delivery
PE shrink film, carton or custom package
About us
Haining Lisheng Decoration Material Co., Ltd is a professional PVC folding door manufacturer which were founded in 2009 and located in Zhejiang province, China.
Hot Tags: interior pvc folding door, China, suppliers, manufacturers, factory, customized, White Glass PVC Folding Door, PVC Vinyl Accordion Door, PVC Toilet Folding Door, Transparent Glass PVC Folding Door, Sliding Folding PVC Door, Plastic PVC Folding Door
Previous: PVC Vinyl Accordion Door
Next: Plastic PVC Folding Door
Send Inquiry
You Might Also Like
